Acrylic Candle Mold - Simple

Acrylic candle mould - Simple

Create a unique classic taper candle with the Simple acrylic mould. This is a versatile option for making decorative candles, interior arrangements, and handmade gifts.

This acrylic mould for pillar candles is designed for use with very hard pillar waxes intended for pillar candle production. Its three-part construction and wick hole make casting easier, and once the wax has fully set, allow for gentle removal of the finished candle.

Mould dimensions:
Diameter: 5.3 cm
Height: 27 cm

Casting dimensions:
Diameter: 2.2 cm
Height: 25 cm

Weight of casting made from soy wax: 52 grams
+/- 5%

Securing rubber bands are not included in the set. Proper securing of the mould parts is very important - it reduces the risk of elements separating and hot wax leaking during pouring.

How to use:

1. Join the mould parts and ensure they fit together snugly.
2. Thread a cord-type wick through the prepared hole in the mould.
   
3. Place the mould on a dry, stable surface.
4. Slowly pour the hot mixture into the mould, minimising air bubbles.
5. Leave the casting to cool completely. The cooling time depends on the type of material used and the ambient temperature.
6. After full cooling, check if the wax has separated from the mould walls.
7. Remove the securing bands, gently separate the mould parts, and carefully remove the candle.

Cleaning and care: After use, wash the mould with warm water and a small amount of mild detergent (e.g., dish soap), then rinse thoroughly and allow to dry completely. Do not use sharp tools, abrasive sponges, or aggressive cleaning agents that could damage the mould's surface. To facilitate the removal of more complex castings, you can use an appropriate silicone release agent for moulds, according to its instructions.

IMPORTANT: The mould is intended only for hard waxes suitable for pillar candles. Using too soft a wax can cause it to stick to the mould's surface and make it difficult or impossible to remove the finished candle. If the wax has not fully separated from the mould, leave it for additional time to cool completely. The mould can be placed briefly in a cooler place. Then, the mould walls can be very gently tapped.

To extend the life of the mould and facilitate the removal of cast elements, use silicone spray.

Safety information: The product is intended for making candle casts. It is not a toy. When working with heated wax, soap base, or other hot mass, exercise particular caution due to the risk of burns. Place the mold on a dry, stable surface and secure it with rubber bands. Do not touch or move the mold while it is filled with hot mass. Check the condition of the mold before each use. Do not use the product if there are visible cracks, cuts, or other damage that could cause the hot mass to leak. The product should be stored in a dry place. Keep out of reach of young children and animals. Do not use for preparing or shaping food unless the manufacturer has explicitly confirmed that the given mold model complies with the requirements for materials intended for food contact. When using dyes, the mold may become stained.

Manufacturer:

Grupa Easy Spółka z o.o.

ul. Polna 1a

21-470 Krzywda - Poland

Tel.: + 48 511 779 510

kontakt@easycandle.pl

Country of origin: China