Plaster Mold - Container M

Silicone mold Container M - for plaster, concrete, and resin

Create a practical container with a silicone mold designed for making castings from plaster, concrete, and resin. The finished casting can serve as a decorative container for small accessories, jewelry, or other small items, as well as a standalone interior decoration element.

The silicone construction makes it easy to remove the finished, hardened casting and helps maintain its shape during decoration.

Mold dimensions:
Height: 9 cm
Diameter: 9.3 cm

How to use:

1. Before use, ensure the mold is clean, dry, and undamaged.
2. Place it on a stable, level surface.
3. Prepare plaster, concrete, epoxy resin, or another compatible compound according to the manufacturer's recommendations.
4. Slowly pour the prepared compound into the mold, trying to limit the formation of air bubbles.
5. Leave the casting to fully set, dry, or cure.
6. Once the appropriate hardness is achieved, gently peel the silicone away from the edges of the casting.
7. Carefully remove the finished container from the mold.

Do not remove the casting before it is fully cured, as this may cause cracking, deformation, or surface damage.

Cleaning and care: After use, wash the mold with warm water and a small amount of mild detergent (e.g., dish soap), then rinse thoroughly and allow it to dry completely. Do not use sharp tools, abrasive sponges, or aggressive cleaning agents that could damage the mold's surface.

Safety information: The product is intended for making decorative casts from plaster, concrete, and epoxy resin. It is not a toy. The mold should be placed on a dry, stable, and level surface. Do not move the mold filled with liquid mass before it has properly set or cured. Check the condition of the mold before each use. Do not use the product if there are visible cracks, cuts, tears, or other damage that could lead to material leakage. Do not use sharp tools to remove the finished cast, as they may damage or cut the silicone. The product should be stored in a dry place, away from sources of heat and direct sunlight. Keep out of reach of young children and animals. Do not use for preparing or shaping food unless the manufacturer has explicitly confirmed that the given mold model complies with the requirements for materials intended for food contact. When using dyes, pigments, or strongly staining materials, the silicone mold may become permanently stained. A change in the color of the silicone does not necessarily affect the mold's continued usability.

Manufacturer:

Grupa Easy Spółka z o.o.

ul. Polna 1a

21-470 Krzywda - Poland

Tel.: + 48 511 779 510

kontakt@easycandle.pl

Country of origin: China