Premium Silicone Mold - Bird

Silicone mold Premium Bird - for candles

Add charm and unique character to your handmade products with the Premium Bird silicone mold. Made of soft and very high-quality pink silicone, the mold is durable and allows for repeated candle pouring. It does not absorb odors or fat-soluble dyes and yellows slower than molds made of clear or white silicone. It is easy to demold and has no cut. The mold is intended for people with some experience in candle making.

Dimensions of mold 1 (bird looking sideways):
Height: 11 cm
Width: 13 x 8.5 cm

Cast dimensions:
Height: 10 cm
Width: 11.7 x 7 cm
Weight of soy wax cast: 240 grams
+/- 5%

Dimensions of mold 2 (bird with head straight):
Height: 11 cm
Width: 13 x 8.5 cm

Cast dimensions:
Height: 9.7 cm
Width: 11.4 x 7.2 cm

Weight of soy wax cast: 230 grams
+/- 5%

Dimensions taken at the widest point.

Notes: This mold has a medium difficulty level, not recommended for beginners in candle making. The mold has no cut.

Pouring: To avoid incomplete fills, pour the mold halfway with wax, squeeze and tap several times to allow air to escape upwards, then fill the rest of the mold with wax.

Instructions for use:

1. Before use, make sure the mold is clean, dry, and undamaged.
   Place it on a stable, level, and heat-resistant surface.
2. Melt the wax or glycerin base. If necessary, add appropriate dye, fragrance composition, or other additives as specified in the recipe.
3. Slowly fill the mold with the prepared mixture. Pour carefully to minimize air bubbles.
4. Allow the cast to cool completely.
5. Once completely set, gently pull back the silicone walls of the mold and carefully remove the finished cast.

Cleaning and care: After use, wash the mold with warm water and a small amount of mild detergent (e.g., dish soap), then rinse thoroughly and allow to dry completely. Do not use sharp tools, abrasive sponges, or aggressive cleaning agents that could damage the mold surface. To facilitate demolding of more complex casts, an appropriate silicone release agent for molds can be used, according to its instructions.

To extend the life of the mold and facilitate the removal of cast elements, use silicone spray.

Safety information: The product is intended for making casts/candles/soaps/etc. It is not a toy. When working with heated wax, soap base, or other hot mass, exercise particular caution due to the risk of burns. Place the mold on a dry, stable surface. Do not touch or move the mold while it is filled with hot mass. Check the condition of the mold before each use. Do not use the product if there are visible cracks, cuts, or other damage that could cause the hot mass to leak. The product should be stored in a dry place. Keep out of reach of young children and animals. Do not use for preparing or shaping food unless the manufacturer has explicitly confirmed that the given mold model complies with the requirements for materials intended for food contact. When using dyes or intense fragrance compositions, the silicone mold may become permanently stained and absorb the scent. A change in color or a lingering odor of the silicone does not affect the mold's continued usability.

Manufacturer:

Grupa Easy Spółka z o.o.

ul. Polna 1a

21-470 Krzywda - Poland

Tel.: + 48 511 779 510

kontakt@easycandle.pl

Country of origin: China